Osprey Mutant 22 Climbing Pack – Tungsten Grey

$ 86.09

Category: Outdoor Cooking

Unisex 22L climbing pack built with lightweight NanoFly™ and robic fabrics for impressive durability. Designed for done-in-a-day alpine missions or for multi-pitch climbs on rock or ice, the Osprey Mutant 22 pack is great for the vertical enthusiast looking for a streamlined pack. Engineered for done-in-a-day endeavours on vertical ice and alpine ascents, the Mutant 22 was first developed with the help of local guides and athletes. Since then, it’s tamed all seasons and climbing disciplines, receiving a refreshing update. New colours, advanced fabrics and refined features make the latest iteration of Mutant 22 even more formidable than its predecessor, proving that the evolution isn’t done yet. Features Removable webbing gear attachment straps Front panel daisy chain loops, compatible with Voile straps Three-point haul system Snowshed fabric backpanel Dual ToolLocks with bungee tie-offs Internal hydration sleeve Lightweight, glove friendly buckles Rope attachment/internal compression Removable padded web belt and ice gear carry loops Zip mesh pocket under large zip bucket opening Dual upper compression straps Side loops for additional compression, attachment points or to rig A frame ski carry; compatible with Voile straps Weight: 0.7 kg Dimensions (CM): 50H 28W 22D Fabric: bluesign® approved 210D recycled high tenacity nylon, PFC/ PFAS-free DWR Volume: 22L

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

Use blades that meet applicable industrial safety code specifications.
Use blades that are approved by the blade manufacturer for the material to be cut.
Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
injury.
The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

Specifications

HydraSaws
Model	S14	S16	S20	S24
Part #	2001400	2001600	2002000	2002400
Blade Size	14 in. (35.5 cm)	16 in. (40.6 cm)	20 in. (50.8 cm)	24 in. (61.0 cm)
Cutting Depth	5.25 in. (13.3 cm)	6 in. (15.2 cm)	7.5 in. (19 cm)	9.5 in. (24 cm)
Blade Speed	4100 rpm	2750 rpm	1830 rpm	1455 rpm
Flow	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)
Pressure Range	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)
Weight	28 lbs. (12.7 kg)	39 lbs. (17.7 kg)	52 lbs. (23.6 kg)	54 lbs. (24.5 kg)