Simforge V5 Sim Racing Electronics ( With Software)

$ 99.10

Category: Outdoor Cooking

Description Compatible with Simforge Mark-1 Simforge Mark-1 3-Pedal Set Simforge Mark-1 Dark Edition Simforge Mark-1 | 2 Pedal Set �� Key Features (Optimized for Performance & Flexibility) ✅ 24-bit brake resolution – Unmatched precision for brake pressure modulation✅ 10-bit throttle & clutch resolution – Smooth, consistent input✅ Customizable pedal curves – Fine-tune brake & throttle response to suit your driving style✅ EEPROM memory saving – Your settings stay saved even after powering down✅ Screw terminal connectors – Easily integrate existing load cell wires✅ Plug & play with Simforge Mark-1 pedals – Also ideal for DIY pedal setups✅ Arduino-based – Open-source, reliable, and easy to update (If you have USB Breakout Boards and Cables on your pedals, please mention if you’ll like a new one in the order notes section) �� Why Sim Racers Love the V5 Electronics Board This board was designed by sim racers, for sim racers. The 24-bit brake resolution gives you the detailed control you need to trail brake like a pro. Whether you’re shaving off milliseconds in time trials or fighting for position in an endurance race, this upgrade helps you stay consistent and confident. �� Watch & Learn ��️ Software Overview – Get to know Simforge PedalFx Calibration Software �� Setup Tutorial – Follow the V5 Electronics Board Setup Guide �� Perfect For: Simforge Mark-1 Pedal owners DIY sim racing pedal builders Anyone looking to upgrade to pro-level pedal control without changing hardware �� Get Ready to Race with Total Control Stop compromising with stock electronics. The Simforge V5 brings your pedals to life with race-grade precision and smart customization options. �� Order now and feel the difference in every corner.

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

Use blades that meet applicable industrial safety code specifications.
Use blades that are approved by the blade manufacturer for the material to be cut.
Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
injury.
The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

Specifications

HydraSaws
Model	S14	S16	S20	S24
Part #	2001400	2001600	2002000	2002400
Blade Size	14 in. (35.5 cm)	16 in. (40.6 cm)	20 in. (50.8 cm)	24 in. (61.0 cm)
Cutting Depth	5.25 in. (13.3 cm)	6 in. (15.2 cm)	7.5 in. (19 cm)	9.5 in. (24 cm)
Blade Speed	4100 rpm	2750 rpm	1830 rpm	1455 rpm
Flow	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)
Pressure Range	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)
Weight	28 lbs. (12.7 kg)	39 lbs. (17.7 kg)	52 lbs. (23.6 kg)	54 lbs. (24.5 kg)