Thrustmaster TCA Quadrant Airbus edition

$ 94.63

Category:
Description ICONIC AIRBUS CONTROLS “The TCA Quadrant Airbus Edition features 8 ergonomic physical action buttons (plus 8 virtual buttons on the thrust levers, for a total of 16), which are replicas of Airbus airliner controls (A320neo type).Feel realistic sensations when using the throttle quadrant’s buttons, detents and other controls — just like a real aircraft captain.” DUAL THRUST LEVERS “The TCA Quadrant Airbus Edition features two separate thrust levers, inspired by their real counterparts found on Airbus airliners.For even more realistic use with four-engine aircraft (Airbus A380 type), two throttle quadrants can be linked together (additional throttle quadrant sold separately), giving you access to four thrust levers instead of two!” UNIVERSAL THRUST REVERSER The TCA Quadrant Airbus Edition features a built-in thrust reverser mechanism, which is fully functional on airliners, light aircraft and transport aircraft. PILOT ANY TYPE OF AIRCRAFT “The stepped mode is inspired by its counterpart found on Airbus airliners, with iconic detents.Mechanical selectors let you disable the detents and thrust reversers (to switch to linear axis mode), for flexible piloting of any type of aircraft.” AIRBUS TCA AVIATION ECOSYSTEM “The Airbus TCA (Thrustmaster Civil Aviation) ecosystem offers many optional add-ons, to enhance your immersion in games.Check out the TCA Sidestick Airbus Edition, TCA Quadrant Add-On Airbus Edition, TM Flying Clamp and the famous TFRP rudder system (all sold separately) for breathtaking flying sessions.” Features

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

  1. Use blades that meet applicable industrial safety code specifications.
  2. Use blades that are approved by the blade manufacturer for the material to be cut.
    Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
  3. Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
  4. Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

  1. The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
    cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
    injury.
  2. The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

 

 

Specifications

HydraSaws
ModelS14S16S20S24
Part #2001400200160020020002002400
Blade Size14 in. (35.5 cm)16 in. (40.6 cm)20 in. (50.8 cm)24 in. (61.0 cm)
Cutting Depth5.25 in. (13.3 cm)6 in. (15.2 cm)7.5 in. (19 cm)9.5 in. (24 cm)
Blade Speed4100 rpm2750 rpm1830 rpm1455 rpm
Flow5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)
Pressure Range2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)
Weight28 lbs. (12.7 kg)39 lbs. (17.7 kg)52 lbs. (23.6 kg)54 lbs. (24.5 kg)

Manuals