Pentair GRO75-HE 4-Stage RO System
$ 96.61
Description The Pentair GRO75-HE 4-Stage Reverse Osmosis System delivers high-efficiency drinking water purification with dependable performance and minimal waste. Designed for residential under-sink installation, this four-stage RO system uses Pentair’s advanced GRO (Green Reverse Osmosis) membrane technology to reduce dissolved solids and a broad range of common contaminants, while optimizing water use and improving the taste, clarity, and safety of your tap water. With a 75-gallon-per-day (GPD) production capacity, this system is ideal for everyday household use, providing refreshing, great-tasting water for drinking, cooking, beverages, and ice-making. 4-Stage Filtration Process Sediment Pre-Filter – Removes sand, silt, rust, and particulate matter Carbon Pre-Filter – Reduces chlorine, taste, and odor to protect the RO membrane GRO High-Efficiency RO Membrane – Reduces dissolved solids and a wide range of contaminants Post-Carbon Polishing Filter – Enhances taste and freshness of purified water Key Features & Benefits High-efficiency GRO membrane for enhanced water recovery 75 GPD production suitable for most residential needs Reduces TDS, chlorine, heavy metals, fluoride, nitrates, and more Compact under-sink design with dedicated RO faucet Easy-to-change filter cartridges Improves overall drinking water taste and quality Applications Home under-sink drinking water purification Kitchen ice maker and beverage water Municipal or properly pre-treated well water What’s Included 4-stage RO filtration assembly GRO membrane Pre- and post-filters Storage tank Dedicated drinking water faucet Installation tubing and hardware Maintenance & Filter Replacement Sediment & carbon filters: every 6–12 months (depending on water quality) RO membrane: every 2–3 years (depending on usage and feed water) Simple cartridge changes designed for homeowner or technician service Why Choose the Pentair GRO75-HE RO System Trusted Pentair water filtration technology High-efficiency design minimizes waste while maximizing clean water Consistent daily production for household demand Enhances hydration, cooking water, and beverage quality
FAQs
What are the blade requirements for this saw?
Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.
- Use blades that meet applicable industrial safety code specifications.
- Use blades that are approved by the blade manufacturer for the material to be cut.
Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations. - Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
- Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.
What are the hydraulic power source requirements for this saw?
The hydraulic power source must meet the following design criteria:
- The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
injury. - The hydraulic power source must meet the hydraulic requirements found in the product manual.
What type of maintenance is required for this saw?
Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.
Specifications
| HydraSaws | ||||
|---|---|---|---|---|
| Model | S14 | S16 | S20 | S24 |
| Part # | 2001400 | 2001600 | 2002000 | 2002400 |
| Blade Size | 14 in. (35.5 cm) | 16 in. (40.6 cm) | 20 in. (50.8 cm) | 24 in. (61.0 cm) |
| Cutting Depth | 5.25 in. (13.3 cm) | 6 in. (15.2 cm) | 7.5 in. (19 cm) | 9.5 in. (24 cm) |
| Blade Speed | 4100 rpm | 2750 rpm | 1830 rpm | 1455 rpm |
| Flow | 5-8 gpm (20-30 lpm) | 5-8 gpm (20-30 lpm) | 5-8 gpm (20-30 lpm) | 5-8 gpm (20-30 lpm) |
| Pressure Range | 2000 – 2500 psi (138 – 172 bar) | 2000 – 2500 psi (138 – 172 bar) | 2000 – 2500 psi (138 – 172 bar) | 2000 – 2500 psi (138 – 172 bar) |
| Weight | 28 lbs. (12.7 kg) | 39 lbs. (17.7 kg) | 52 lbs. (23.6 kg) | 54 lbs. (24.5 kg) |




Smart Purifier™ Plus Tankless Reverse Osmosis System (Excalibur)
Excalibur 6 Stage 75GPD Superior RO System with Alkaline
Sureflo® Preferred Reverse Osmosis System
Excalibur 5 Stage 75GPD Superior Reverse Osmosis System