ThrustMaster T-LCM Pedals | Magnetic Load Cell Pedals | Racing Wheel Add-On | PC/ PS4/ Xbox One

$ 92.94

Category: Outdoor Cooking

Description MAGNETIC TECHNOLOGY The H.E.A.R.T (HallEffect AccuRate Technology) system — contactless technology without any potentiometers — ensures an unlimited lifespan and optimal accuracy in racing sessions: up to 16-bit resolution, representing 65,536 values per pedal. UP TO 220 LB / 100 KG OF PRESSURE ON THE LOAD CELL FORCE SENSOR The brake pedal in the T-LCM Pedals adjusts to your gaming intensity and driving style. You’ll get the perfect amount of braking power according to the force applied on the brake pedal. ADJUSTABLE MECHANICAL BRAKE FORCE The included set of 6 springs allows for a multitude of quick adjustments, allowing you to customize the feel on the brake pedal to your liking. Adjust the pressure force for the best fit with your racing setup (desk or table, Wheel Stand Pro, GT cockpit, F1 cockpit, etc.). 100% METAL MATERIALS Mounted on a stable, sturdy structure designed with the most experienced racers in mind, the 100% metal pedal heads, attached to 100% metal pedal arms, ensure a good grip in order to optimize the feeling of control while racing. INDEPENDENTLY-ADJUSTABLE PEDALS The positions of the 3 pedals are adjustable in terms of height, inclination and spacing.The calibration software also lets you electronically adjust the brake force, along with the dead zones for all 3 pedals. REINFORCED STABILITY The large, textured foot rest stops your feet from sliding, and prevents inadvertent slips.Weighing in at more than 11 lb / 5 kg, the heavy-duty pedal set provides stability that you can always depend on. Features

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

Use blades that meet applicable industrial safety code specifications.
Use blades that are approved by the blade manufacturer for the material to be cut.
Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
injury.
The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

Specifications

HydraSaws
Model	S14	S16	S20	S24
Part #	2001400	2001600	2002000	2002400
Blade Size	14 in. (35.5 cm)	16 in. (40.6 cm)	20 in. (50.8 cm)	24 in. (61.0 cm)
Cutting Depth	5.25 in. (13.3 cm)	6 in. (15.2 cm)	7.5 in. (19 cm)	9.5 in. (24 cm)
Blade Speed	4100 rpm	2750 rpm	1830 rpm	1455 rpm
Flow	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)
Pressure Range	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)
Weight	28 lbs. (12.7 kg)	39 lbs. (17.7 kg)	52 lbs. (23.6 kg)	54 lbs. (24.5 kg)