Home » Shop » Handheld Hydraulic Cut-off Saw | 9.5″ Cutting Depth | 24″ BladeManuals

Weber® Spirit E-335 – Gas

$ 92.25

Category:
Barbecue food that tastes better than ever on the reinvented 3-burner Spirit® E-335 Gas Barbecue with Sear Zone and side burner. Create bold, flavourful sear marks on meat, fish, and vegetables with two Boost burners that unleash 40% more power in the Sear Zone. Ignite each individual burner easily with one hand with Snap-Jet ignition and control the heat precisely with a full range of temperatures from high to low and everything in between. Make the most of your space by adding a variety of Weber Works snap-on accessories (sold separately) to the side rails. Turn your barbecue into a Dutch oven, poultry roaster, and more with the included Weber Crafted® cooking grates that hold Gourmet BBQ System custom-fit grillware (sold separately). Keep platters, seasonings, and tools within reach with hammertone metal side tables, with one that conveniently folds down to fit smaller spaces. • 10-year limited warranty • 2 Boost burners unleash 40% more power in the Sear Zone • Weber Works side rails for snap-on accessories (sold separately) • Side burner provides extra cooking space for sauces and sides • Weber Crafted® porcelain-enamelled cast iron cooking grates • Gourmet BBQ System compatible (grillware sold separately) • Precise, consistent heat cooks food evenly across the cooking grates • Snap-Jet ignition for one hand lighting of individual burners

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

  1. Use blades that meet applicable industrial safety code specifications.
  2. Use blades that are approved by the blade manufacturer for the material to be cut.
    Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
  3. Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
  4. Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

  1. The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
    cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
    injury.
  2. The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

 

 

Specifications

HydraSaws
ModelS14S16S20S24
Part #2001400200160020020002002400
Blade Size14 in. (35.5 cm)16 in. (40.6 cm)20 in. (50.8 cm)24 in. (61.0 cm)
Cutting Depth5.25 in. (13.3 cm)6 in. (15.2 cm)7.5 in. (19 cm)9.5 in. (24 cm)
Blade Speed4100 rpm2750 rpm1830 rpm1455 rpm
Flow5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)
Pressure Range2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)
Weight28 lbs. (12.7 kg)39 lbs. (17.7 kg)52 lbs. (23.6 kg)54 lbs. (24.5 kg)

Manuals

Related products

Cart