Plug Anal Fun Factory BOOTIE M

$ 93.15

Category: Outdoor Cooking

Description ✨ Bootie Plug de Fun Factory: suavidad, control y placer en equilibrio perfecto ✨ Diseñado para quienes buscan explorar nuevas sensaciones con seguridad y comodidad ��Este plug combina una textura ultra suave con la firmeza ideal para estimular justo donde quieres… sin perder confort. �� Lo que lo hace irresistible• �� Punta cónica que facilita una inserción suave y progresiva• �� Base ergonómica que se adapta naturalmente al cuerpo• ⚖️ Firme pero flexible: el balance perfecto entre control y placer• �� Silicona de grado médico, segura y amigable con tu piel• �� No poroso y fácil de limpiar �� Ideal para seguir explorandoPerfecto para usuarios intermedios que quieren subir de nivel y profundizar la experiencia sin complicaciones. �� Medidas pensadas para tu comodidad• Largo: 9,3 cm• Diámetro: 1,7 – 3,5 cm �� Recomendación claveÚsalo con lubricante base agua para una experiencia mucho más suave y placentera. �� Cuidados simplesLímpialo antes y después de cada uso con agua tibia y jabón suave o limpiador especializado, sécalo bien y guárdalo en un lugar seco. ✨ Discreto, elegante y diseñado para sentir más… ¿te animas a descubrirlo?

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

Use blades that meet applicable industrial safety code specifications.
Use blades that are approved by the blade manufacturer for the material to be cut.
Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
injury.
The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

Specifications

HydraSaws
Model	S14	S16	S20	S24
Part #	2001400	2001600	2002000	2002400
Blade Size	14 in. (35.5 cm)	16 in. (40.6 cm)	20 in. (50.8 cm)	24 in. (61.0 cm)
Cutting Depth	5.25 in. (13.3 cm)	6 in. (15.2 cm)	7.5 in. (19 cm)	9.5 in. (24 cm)
Blade Speed	4100 rpm	2750 rpm	1830 rpm	1455 rpm
Flow	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)
Pressure Range	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)
Weight	28 lbs. (12.7 kg)	39 lbs. (17.7 kg)	52 lbs. (23.6 kg)	54 lbs. (24.5 kg)