Einhell Power X-Change TE-CD 18 volt Li Brushless Combi Drill Bare Unit
$ 96.45
Visit Stockist to see if FREE SHIPPING IS INCLUDED The Einhell Einhell TE-CD 18 Li Brushless Combi Drill is a versitile tool which can provide screwdriver, drill and hammer functions. This combined with a short and lightweight build and soft grip surfaces makes this an enjoyable and comfortable product to use for long periods.This product is also part of the Power X-Change family, a new lithium-ion technology from Einhell. All system batteries from the Power X-Charge series can be used in this product. Supplied without battery and without charger. Brushless motor – more power & longer service life3 functions ? Screwdriver, drill & hammer drillMax torque 60 NmHigh-grade 13mm metal drill chuckErgonomic design with Softgrip for comfortable operationWeight 1.3 kg
FAQs
What are the blade requirements for this saw?
Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.
- Use blades that meet applicable industrial safety code specifications.
- Use blades that are approved by the blade manufacturer for the material to be cut.
Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations. - Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
- Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.
What are the hydraulic power source requirements for this saw?
The hydraulic power source must meet the following design criteria:
- The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
injury. - The hydraulic power source must meet the hydraulic requirements found in the product manual.
What type of maintenance is required for this saw?
Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.
Specifications
| HydraSaws | ||||
|---|---|---|---|---|
| Model | S14 | S16 | S20 | S24 |
| Part # | 2001400 | 2001600 | 2002000 | 2002400 |
| Blade Size | 14 in. (35.5 cm) | 16 in. (40.6 cm) | 20 in. (50.8 cm) | 24 in. (61.0 cm) |
| Cutting Depth | 5.25 in. (13.3 cm) | 6 in. (15.2 cm) | 7.5 in. (19 cm) | 9.5 in. (24 cm) |
| Blade Speed | 4100 rpm | 2750 rpm | 1830 rpm | 1455 rpm |
| Flow | 5-8 gpm (20-30 lpm) | 5-8 gpm (20-30 lpm) | 5-8 gpm (20-30 lpm) | 5-8 gpm (20-30 lpm) |
| Pressure Range | 2000 – 2500 psi (138 – 172 bar) | 2000 – 2500 psi (138 – 172 bar) | 2000 – 2500 psi (138 – 172 bar) | 2000 – 2500 psi (138 – 172 bar) |
| Weight | 28 lbs. (12.7 kg) | 39 lbs. (17.7 kg) | 52 lbs. (23.6 kg) | 54 lbs. (24.5 kg) |
Manuals
Related products
- Add to cart
- Select options This product has multiple variants. The options may be chosen on the product page
- Select options This product has multiple variants. The options may be chosen on the product page
- Select options This product has multiple variants. The options may be chosen on the product page
Streetwize 12 volt Impact Wrench 1/2 Inch Drive
Einhell Power-X-Change TE-CW 18 LI BL 18 volt Li Brushless Impact Wrench Bare Unit 215Nm
Clarke Contractor CON180 180mm Sander and Polisher 1300 watt 230 Volt motor