Pontec Multiclear Set 5000
$ 93.01
The MultiClear Set 5000 from Pontec provides an ideal entry level set-up with optimally matched Pontec pump, filter and UVC for ponds up to 5000 litres with no fish. If the pond houses fish then it will support a pond of 2,500 litres.&edsp;&edsp;The set consists of a Pontec PondoVario 1500 pump, MultiClear 5000 filter with integral 7w UVC and comes complete with 3m of flexi pipe. The Pontec PondoVario 1500 is a reliable, energy efficient, multi-purpose pump with solids handling of up to 4mm and provides an ideally matched pump and filter specification. The MultiClear 5000 Filter has a new compact look with a top mounted 7w UVC. The 4 stage bio-mechanical filtration consists of easy to clean Japanese matting, coarse foam, fine foam and bio balls.
FAQs
What are the blade requirements for this saw?
Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.
- Use blades that meet applicable industrial safety code specifications.
- Use blades that are approved by the blade manufacturer for the material to be cut.
Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations. - Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
- Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.
What are the hydraulic power source requirements for this saw?
The hydraulic power source must meet the following design criteria:
- The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
injury. - The hydraulic power source must meet the hydraulic requirements found in the product manual.
What type of maintenance is required for this saw?
Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.
Specifications
| HydraSaws | ||||
|---|---|---|---|---|
| Model | S14 | S16 | S20 | S24 |
| Part # | 2001400 | 2001600 | 2002000 | 2002400 |
| Blade Size | 14 in. (35.5 cm) | 16 in. (40.6 cm) | 20 in. (50.8 cm) | 24 in. (61.0 cm) |
| Cutting Depth | 5.25 in. (13.3 cm) | 6 in. (15.2 cm) | 7.5 in. (19 cm) | 9.5 in. (24 cm) |
| Blade Speed | 4100 rpm | 2750 rpm | 1830 rpm | 1455 rpm |
| Flow | 5-8 gpm (20-30 lpm) | 5-8 gpm (20-30 lpm) | 5-8 gpm (20-30 lpm) | 5-8 gpm (20-30 lpm) |
| Pressure Range | 2000 – 2500 psi (138 – 172 bar) | 2000 – 2500 psi (138 – 172 bar) | 2000 – 2500 psi (138 – 172 bar) | 2000 – 2500 psi (138 – 172 bar) |
| Weight | 28 lbs. (12.7 kg) | 39 lbs. (17.7 kg) | 52 lbs. (23.6 kg) | 54 lbs. (24.5 kg) |
Manuals
Related products
- Add to cart
- Select options This product has multiple variants. The options may be chosen on the product page
- Select options This product has multiple variants. The options may be chosen on the product page
- Select options This product has multiple variants. The options may be chosen on the product page
Ravenglass Double Rabbit Hutch Soft Grey
Wasdale Single Hutch on Legs
Royal Canin – Cocker Spaniel Adult 12kg