Home » Shop » Handheld Hydraulic Cut-off Saw | 9.5″ Cutting Depth | 24″ BladeManuals

Tacos de Goma Elevadores 2 Columnas (precio unitario)

$ 34.98

Category:
Amiguito!! Dame 5 estrellas☺ y REGALO «GRATIS» con tu compra   Tacos de goma para Elevadores de Coches Taco de goma G1   Características Precio: 10 €. ø Pletina: 110 mm. Espesor pletina: 9 mm. Taco de goma G4   Características Precio: 12 €. ø Pletina 130 mm. Espesor pletina: 9 mm. Taco de goma G5   Características Precio: 11 €. ø Pletina: 110 mm, ø Agujero: 7 mm, Espesor pletina: 5 mm. Taco de goma G8   Características Precio: 10 €. ø Pletina: 100 mm. Espesor pletina: 11 mm. Taco de goma G9   Características Precio: 11 €. ø Pletina: 108 mm, ø Agujeros: 8 mm, Espesor: 31 mm. Taco de goma G9 B   Características Precio: 14 €. ø Pletina: 108 mm, ø Agujeros: 8 mm, Espesor: 35 mm. Taco de goma G10   Características Precio: 11 €. ø pletina: 132 mm. Entre 3 agujeros: 45 mm. Taco de goma G11   Características Precio: 11 €. ø Pletina 120 mm. Entre centros agujeros 90 mm. Taco de goma G18   Características Precio: 11 €. ø Pletina 110 mm, ø externo 120 mm, espesor 27 mm. Taco de goma G19   Características Precio: 11 €. ø Pletina 108 mm, ø externo 123 mm, Espesor 25 mm. Taco de goma G20   Características Precio: 11 €. ø Pletina 135 mm, ø externo 147 mm, grosor 27 mm Taco de goma G21   Características Precio: 11 €. ø externo 145 mm. ø centradores 50/12 mm. Taco de goma G23   Características Precio: 11 €. ø Pletina 135 mm, ø externo 148 mm, grosor 25 mm. Taco de goma G28   Características Precio: 12 €. ø Pletina 125 mm, ø externo 130 mm, grosor 25 mm. Taco de goma G29   Características Precio: 10 €. ø Pletina 85 mm, ø externo 98 mm, grosor 21 mm. Taco de goma G32   Características Precio: 11 €. ø Pletina: 114 mm, ø externo: 122 mm, grosor: 28 mm. Taco de goma G33   Características Precio: 12 €. ø Pletina: 130 mm, ø externo: 139 mm, grosor: 28 mm. Taco de goma G34   Características Precio: 12 €. ø Pletina: 147 mm, ø externo: 155 mm, grosor: 24 mm. Taco de goma G35   Características Precio: 12 €. ø Pletina: 140 mm. grosor: 15 mm. Taco de goma G36   Características Precio: 11 €. ø Pletina: 122 mm, grosor: 18 mm, entre agujeros 66mm / 88mm. Taco de goma G37   Características Precio: 12 €. ø Pletina: 144 mm, grosor: 23 mm, entre agujeros: 50 mm. Taco de goma G7   Características Precio: 10 €. 125 mm Entre centro agujero 90 mm. ø Agujeros 7 mm. Taco de goma G25   Características Precio: 10 €. Ancho: 83 mm Largo: 118 mm. Alto: 20 mm SKU: LKW-17 Categorías: elevador-de-coches, Elevadores de Coches Etiquetas: gomas elevador, tacos de goma, tacos de goma elevador, tacos de goma elevador 2 columnas, tacos goma elevador dos columnas, tacos para elevador de coches, tacos-goma-elevador

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

  1. Use blades that meet applicable industrial safety code specifications.
  2. Use blades that are approved by the blade manufacturer for the material to be cut.
    Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
  3. Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
  4. Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

  1. The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
    cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
    injury.
  2. The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

 

 

Specifications

HydraSaws
ModelS14S16S20S24
Part #2001400200160020020002002400
Blade Size14 in. (35.5 cm)16 in. (40.6 cm)20 in. (50.8 cm)24 in. (61.0 cm)
Cutting Depth5.25 in. (13.3 cm)6 in. (15.2 cm)7.5 in. (19 cm)9.5 in. (24 cm)
Blade Speed4100 rpm2750 rpm1830 rpm1455 rpm
Flow5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)
Pressure Range2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)
Weight28 lbs. (12.7 kg)39 lbs. (17.7 kg)52 lbs. (23.6 kg)54 lbs. (24.5 kg)

Manuals

Related products

Cart