Buy Booster energy drink

$ 97.14

Category: Outdoor Cooking

Buy Booster energy drink Nutrition factsNutrition factsAs sold for 100 g / 100 mlAs sold per serving (33 cl)Energy (kJ)184 kj607 kjEnergy (kcal)??Energy184 kj (44 kcal)607 kj (145 kcal)Fat0 g0 g- Saturated fat0 g0 gCarbohydrates10.4 g34.3 g- Sugars10.4 g34.3 gFibers0 g0 gProteins0 g0 gSalt0.17 g0.561 gSodium0.068 g0.224 gVitamin B3 / Vitamin PP (Niacin)8 mg26.4 mgVitamin B6 (Pyridoxin)2 mg6.6 mgVitamin B12 (cobalamin)2 µg6.6 µgPantothenic acid / Pantothenate (Vitamin B5)2 mg6.6 mgCaffeine20 mg66 mgNutrition score – France1414Nutri-ScoreEE The Booster Energy Drink Classic is filled in modern cans with a content of 330 milliliters. This makes it particularly popular with younger people. This soft drink is also very good as a pick-me-up due to the caffeine it contains. It is available in our shop in boxes with 24 cans each. Contents: 24 cans Producer / Manufactured for: Veritas Vertriebsges. mbH, New-York-Ring 6, 22291 Hamburg (D) Sales description : Caffeinated soft drink with the addition of 4 vitamins. Buy Booster energy drink All ingredients and nutritional information: Ingredients: water, sugar, acidifier: citric acid; carbonic acid, 0.4% taurine, acidity regulator: trisodium citrate; Aroma, caffeine, colorings: ammonia caramel; Vitamin mix: niacin, pantothenic acid, vitamin B6, vitamin B12. Increased caffeine content. Not recommended for children and pregnant or breastfeeding women (32 mg / 100 ml). Not recommended for people sensitive to caffeine. Do not mix with alcohol. Nutritional values per 100 ml calorific value: 44.00 kilocalories (kcal) calorific value: 187.00 kilojoules (kJ) fat: 0.00 g of which saturated fatty acids: 0.00 g carbohydrates: 10.40 g of which sugar: 10.40 g protein : 0.00 g salt: 0.17 No liability is accepted for the above information. Please check the information on the respective product packaging in each individual case, only these are binding. The product design may differ from the picture. Amount per serving Calories 130 Calories (fat) 0 % Daily value * Total fat content 0g 0% Saturated fat 0g 0% Trans fatty acids 0g cholesterol 0mg 0% Nat. 50mg 2% potassium 0mg 0% Total carbohydrates 32g 11% Fiber 0g 0% sugar 32g protein 0g 0% Vitamin A 0% • Vitamin C 100% Calcium 0% • Iron 0% * Percentages per day refer to a daily intake of 2,000 calories. Depending on your calorie needs, your information will be higher or lower.

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

Use blades that meet applicable industrial safety code specifications.
Use blades that are approved by the blade manufacturer for the material to be cut.
Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
injury.
The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

Specifications

HydraSaws
Model	S14	S16	S20	S24
Part #	2001400	2001600	2002000	2002400
Blade Size	14 in. (35.5 cm)	16 in. (40.6 cm)	20 in. (50.8 cm)	24 in. (61.0 cm)
Cutting Depth	5.25 in. (13.3 cm)	6 in. (15.2 cm)	7.5 in. (19 cm)	9.5 in. (24 cm)
Blade Speed	4100 rpm	2750 rpm	1830 rpm	1455 rpm
Flow	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)
Pressure Range	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)
Weight	28 lbs. (12.7 kg)	39 lbs. (17.7 kg)	52 lbs. (23.6 kg)	54 lbs. (24.5 kg)