226ERS Neo Bar Protein – White Coconut & Chocolate

$ 25.72

Category:
Description 50g protein bar with 46% protein and less than 1% sugar per bar. Description NEO BARS are 50 g protein bars that provide about 23 g of protein per bar and less than 1 g of sugar. A reformulation of the previous one that has been given a crunchy touch and new flavors. The protein comes from ingredients such as milk protein isolate and hydrolysed collagen protein, thus increasing the uptake of amino acids. They contain glycerin that has a moistening function when used in food. On a sports level it helps to achieve a state of hyperhydration, so it can help to maintain hydration levels in athletes so they can maintain their level of performance. Soya nuggets give it a crunchy touch as well as adding vegetable protein from pulses. Enriched with 57 mg of magnesium per bar, contributing to the optimal functioning of muscles and their protein synthesis. And a mix of added vitamins: Vitamin C, Vitamin E, Vitamins B3, B6 and B1. In 4 flavours: Dark chocolate Crunchy: with cocoa powder and covered in dark chocolate. White Choco & Strawberry Crunchy: strawberry flavour and covered in white chocolate. Coconut & Chocolate Crunchy: with grated coconut and covered in dark chocolate. Peanuts & Chocolate Crunchy: with peanuts and covered in milk chocolate. HOW TO USE The bars can be eaten at any time of day, as a healthy snack, as an extra protein boost, between meals or after training mainly NET WEIGHT 50 gr PRODUCT STORAGE Keep in a cool and dry place, out of reach of children, away from sources of heat and intense and direct light. COCONUT & CHOCOLATE INGREDIENTS Humectant: glycerol, milk protein isolate, dark chocolate coating minimum cocoa: 52% with sweetener (sweetener: maltitol, cocoa mass, cocoa butter, emulsifier: soy lecithin, flavours) (13,1%), hydrolysed pork protein, soy nuggets (soy protein isolate, thickener:tapioca starch,salt), pork gelatin, sunflower oil, grated coconut (1,7%), aroma, magnesium oxide, sea salt, acidulant: citric acid, ascorbic acid (vitamin C), DL-a-tocopherol acetate (Vitamin E), Nicotinamide (Vitamin B3), Pyridoxine hydrochloride (Vitamin B6), Thiamine hydrochloride (Vitamin B1).May contain traces of egg, peanut, milk, other nuts, sesame, sulphites and/or derivatives thereof. NUTRITIONAL TABLE   100 gr 50 gr Energy value 1478 kJ / 352 kcal 739 kJ / 176 kcal Fat 7,6 g 3,8 g of which saturated 3,9 g 2,0 g Carbohydrates 38,7 g 19,4 g Of which sugars 0,5 g 0,2 g Polyols 36,5 g 18,2 g Fibre 1,5 g 0,7 g Protein 46,1 g 23,0 g Salt 0,59 g 0,29 g Calculation made on the basis of the known or actual theoretical values for described ingredient

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

  1. Use blades that meet applicable industrial safety code specifications.
  2. Use blades that are approved by the blade manufacturer for the material to be cut.
    Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
  3. Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
  4. Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

  1. The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
    cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
    injury.
  2. The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

 

 

Specifications

HydraSaws
ModelS14S16S20S24
Part #2001400200160020020002002400
Blade Size14 in. (35.5 cm)16 in. (40.6 cm)20 in. (50.8 cm)24 in. (61.0 cm)
Cutting Depth5.25 in. (13.3 cm)6 in. (15.2 cm)7.5 in. (19 cm)9.5 in. (24 cm)
Blade Speed4100 rpm2750 rpm1830 rpm1455 rpm
Flow5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)5-8 gpm (20-30 lpm)
Pressure Range2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)2000 – 2500 psi (138 – 172 bar)
Weight28 lbs. (12.7 kg)39 lbs. (17.7 kg)52 lbs. (23.6 kg)54 lbs. (24.5 kg)

Manuals