Blue Dunes silver Collier

$ 99.80

Category: Outdoor Cooking

This gorgeous vintage model necklace by Matti Hyvärinen was designed in the 1960's and it was introduced internationally in 1970 at the Plaza Athénée Hotel in Paris where Finnish jewelry and Parisian haute couture were showcased. The necklace was inspired by the uncharted territories discovered by the space flights in the sixties. On planet Mars, there are mysterious sand formations called the Blue Dunes from which the collier got its name. The oval parts have a surface that is divided by satin and polished finish. A lovely combination of light and shadow. The substantial necklace weighs about 85 grams. This necklace is made to order and its length is about 16.5. inches or 41 cm. If you wish to have it made longer for you, please let us know. You can also purchase a matching bracelet from us.Sirokoru's modernist Scandinavian pieces are designed by the award-winning Matti Hyvärinen. The timeless vintage models, and the elegant yet minimalist jewelry are made of 925 Sterling silver. Sirokoru are known for their exquisite designs and expertise in handcrafted jewelry.(color photos Ennagraphy).Product number: C 81Material: 925 sterling silverLength: ca. 41 cmWidth: about 2 cm(color photos Ennagraphy)

FAQs

What are the blade requirements for this saw?

Any blade from your supplier must meet the following design criteria. Using blades on this saw that don’t meet these requirements can cause equipment damage and/or personal injury.

Use blades that meet applicable industrial safety code specifications.
Use blades that are approved by the blade manufacturer for the material to be cut.
Use approved dry cutting type blades in dry cutting operations and approved wet cutting type blades in wet cutting operations.
Do not exceed the maximum operating speed of 1830 rpm for the S20, 1455 rpm for the S24, or the blade manufacturer’s rated speed. Blades must be speed tested to ANSI B7.1 safety code specifications.
Always use blades with mounting blotters on both sides when using abrasive blades. Remove the drive pin from the arbor flange before mounting an abrasive blade.

What are the hydraulic power source requirements for this saw?

The hydraulic power source must meet the following design criteria:

The flow must not exceed 8 GPM, and the pressure relief valve must not exceed 2500 psi. Failure to comply could
cause excessive blade rpm and/or overpressurizing the system, resulting in equipment damage and/or personal
injury.
The hydraulic power source must meet the hydraulic requirements found in the product manual.

What type of maintenance is required for this saw?

Inspect the blade mounted on the saw. Remove and destroy the blade if any cracks, chips, gouges, or loose or missing segments are present. Failure to do this can cause personal injury.

Specifications

HydraSaws
Model	S14	S16	S20	S24
Part #	2001400	2001600	2002000	2002400
Blade Size	14 in. (35.5 cm)	16 in. (40.6 cm)	20 in. (50.8 cm)	24 in. (61.0 cm)
Cutting Depth	5.25 in. (13.3 cm)	6 in. (15.2 cm)	7.5 in. (19 cm)	9.5 in. (24 cm)
Blade Speed	4100 rpm	2750 rpm	1830 rpm	1455 rpm
Flow	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)	5-8 gpm (20-30 lpm)
Pressure Range	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)	2000 – 2500 psi (138 – 172 bar)
Weight	28 lbs. (12.7 kg)	39 lbs. (17.7 kg)	52 lbs. (23.6 kg)	54 lbs. (24.5 kg)