The FAI FILTRI CSD Series are economical, medium pressure filters with spin-on convenience and 3 different cleanliness ratings and sizes. They can be used in both return and suction line configurations in hydraulic systems. The entire range meets international filtration standards and can be cross referenced directly with FILTREC spin on cans. Filter Length = 180mm Filter Outside Diameter = 95.6mm Thread = 1.3/8″ UNF Filter Maximum Pressure = 500 PSI (35 BAR) Micron Ratings = 6μm – 25μm (Reference Table Below) When selecting the filtration medium, consider the pressure losses: • Between 0.05 & 0.1 bar for suction line • Up to 0.3 – 0.5 bar for filters fitted on return line   Part # Micron Press.Rating Can Thread A (mm) B (mm) CSD06000A06A 6µm 35 bar 1.3/8”-12 UNO 95.6 180.0 CSD06000P10A 10µm 35 bar 1.3/8”-12 UNO 95.6 180.0 CSD06000P25A 25µm 35 bar 1.3/8”-12 UNO 95.6 180.0     FILTREC CROSS REFERENCE FAI FILTRI FILTREC CSD06000A06A A412G06 CSD06000P10A A412C10 CSD06000P25A A412C25   WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY. Share this: Share on X (Opens in new window) X Share on Facebook (Opens in new window) Facebook Like this:Like Loading… Related